Table of Contents
Advertisement
1.
BURNER DESCRIPTION
One stage gas burner.
The burner meets protection level of IP X0D (IP 40), EN 60529.
Gas train according to EN 676.
The burner is approved for intermittent operation as per Directive EN 676.
Note for Switzerland. Swiss provisions, local and cantonal provisions, the provisions of the SVGW author-
ites for the use of gas, as well as those of the Fir Brigade (VKF), must all be complied with.
Fig. 1
20051276
1 – Air pressure switch
2 – 6 pole socket for gas train
3 – Control box
4 – Reset button with lock-out lamp
5 – Flange with insulating gasket
1.1 BURNER EQUIPMENT
Flange with insulating gasket. . . . . . . . No. 1
Screw and nut for flange . . . . . . . . . . . No. 1
7 pin plug . . . . . . . . . . . . . . . . . . . . . . No. 1
20050873
5
9
Screws and nuts for flange to be fixed to boiler . . .No. 4
4 pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No. 1
3
4
2
6 – Air damper adjustment assembly
7 – Head holder assembly
8 – Pressure test point
9 – Motor
2
GB
6
7
8
1
Advertisement
Chapters
Table of Contents
