VisualSonics Vevo 3100 Getting Started Manual page 20

To turn the system off
Before unplugging the AC power cord or using the power switch, turn off the system
using the power button.
1 Press the power button.
2 Turn off the power switch. See
3 Unplug the AC power cord from the outlet.
4 Release the retainer wire and disconnect the AC power cord from the stand base.
Note:
Restarting the system while it is performing data-intensive background
activities, such as exporting data files, can result in loss of data.
FUJIFILM VisualSonics recommends waiting at least 3 minutes before restarting an
unresponsive system. To power down an unresponsive system, press the power
button and wait until the system shuts down. This procedure may take 1 to 2 minutes.
- 20 -
"Off (supply)" on page 25.