Page 2
PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100 imaging system and MX series transducers Rev 1.0 Introduction FUJIFILM VisualSonics tests disinfectants and disinfectant devices for use with its systems, transducers, and accessories. This document includes instructions for cleaning and disinfecting the Vevo 3100 ultrasound system and MX series transducers.
Page 3
PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100 imaging system and MX series transducers Rev 1.0 Mix the disinfectant solution compatible with the system, following disinfectant label instructions for solution strengths and disinfectant contact duration. See "Compatible disinfectants for the ultrasound system"...
Page 4
To avoid electrical shock, before cleaning, disconnect the transducer from the system. WARNING Avoid contact with the circuit board within the SHIF connector to ensure that the electrical connections are well made when the SHIF is connected to the Vevo 3100 Imaging System. Caution Transducers must be cleaned after every use.
Page 5
Chlorine Dioxide To store a transducer The transducer may be stored in one of the holders along the sides of the Vevo 3100 Imaging System with the nose pointing upward. Always ensure that the cable is not twisted when storing the transducer.
Page 6
PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100 imaging system and MX series transducers Rev 1.0 FUJIFILM VisualSonics, Inc. T.1.416.484.5000 Toll Free (North America) 1.866.416.4636 Toll Free (Europe) +800.0751.2020 www.visualsonics.com VisualSonics ® , Vevo ® , MicroMarker...
Need help?
Do you have a question about the Vevo 3100 and is the answer not in the manual?
Questions and answers