Turning The System On And Off - VisualSonics Vevo 3100 Getting Started Manual

Turning the system on and off

Warning: Verify the supply voltage corresponds to the power supply voltage
range. Using incorrect voltage will damage the system.
Warning: Plug the system only into a grounded outlet. Using a non-
grounded outlet will damage the system.
Warning: Use only power cords provided by FUJIFILM VisualSonics with
the system. Using power cords from other sources, may damage the
system.
To turn the system on
To turn on the Vevo 3100 Imaging System, you must connect the AC power cord to an
outlet first, then turn on the system using the power switch and then the power button.
1 Connect the AC power cord to the stand base and secure the AC power cord with
the retainer wire.
Figure 1-9 The AC power cord connector,
retainer wire and power switch.
- 18 -