Important Safety Instructions - Panasonic ZEQUO 5410DL Installation Manual

Important Safety Instructions

This chapter contains important safety instructions for preventing bodily injury
and/or property damage. Please read carefully, and follow them at all times.
 Severity of bodily injury and/or property damage, which could result from incorrect
use of the Ethernet Switch, are explained below.
WARNING
CAUTION
 The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert
users what they must not do.
 Do not use power supply other than AC 100 - 240 V.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not handle this Ethernet Switch and connection cables during a thunderstorm.
Deviation could lead to electric shock.
 Do not disassemble and/or modify this Ethernet Switch.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not damage the power cord. Do not bend too tightly, stretch, twist, bundle
with other cord, pinch, put under a heavy object and/or heat it.
Damaged power cord could lead to fire, short, and/or electric shock.
Do not unplug nor plug in the power plug with wet hands.

Deviation could lead to electrical shock, and/or equipment failure.
Do not insert or drop any foreign objects such as metal or readily combustible

things into Ethernet Switch through the openings.
Deviation could lead to fire, electrical shock, and/or equipment failure.
Do not store or use the Ethernet Switch in places where it might get splashed

with liquids such as water, in places with a lot of humidity, in places with
conductive dust, or in places where there are corrosive and combustible gases.
Deviation could lead to fire, electrical shock, and/or equipment failure.
Do not use the Ethernet Switch in dusty environments such as on floors,

underneath floors, the backside of ceilings, or boards.
Do not use the Ethernet Switch in very dusty areas such as on floors, underneath
floors, the backside of ceilings, or boards. Deviation could lead to fire, electrical shock,
and/or equipment failure. It is recommended that the Ethernet Switch be operated in
environments such as the inside of racks where it is difficult for dust to be generated.
Do not store or use the Ethernet Switch in places where it will be exposed to

direct sunlight or high temperatures.
The temperature inside will rise, which may cause fire.
Do not store or use the Ethernet Switch in places where there are lots of

vibrations and impacts, or in unstable areas.
It might fall, which may cause injuries and/or equipment failure.
 Do not put the Ethernet Switch into fire.
Deviation could lead to explosion and/or fire.
This symbol indicates a potential hazard
that could result in serious injury or death.
This symbol indicates safety instructions.
Deviation from these instructions could lead
to bodily injury and/or property damage.
WARNING
This symbol is used to alert
users what they must do.
3