These burns can lead to death! • If you think batteries might have been swallowed or otherwise entered the body, seek medical attention immediately! • Keep new and used batteries and an open battery compartment away from children. smartphone-controllable thermometer BT22WP...
Page 3
Information marked with this symbol indicates dangers liquids. to the life and health of persons due to magnetic fields. The Trotec MultiMeasure Mobile app on the terminal device is used for both operation and the evaluation of the measured Disrupted operation or damage to pacemakers and values.
Information about the device Designation Device description Measuring sensor Used in combination with Trotec's MultiMeasure Mobile app the thermometer permits air temperature measurements. On / off / measurement button In case of individual measurements, the measurement value Battery compartment with cover...
• dry and protected from frost and heat • protected from dust and direct sunlight • the storage temperature complies with the values specified in the Technical data • Remove the batteries from the device. smartphone-controllable thermometer BT22WP...
Page 6
ü The Bluetooth function on your terminal device is activated. Install the Trotec MultiMeasure Mobile app on the terminal 1. Start the Trotec MultiMeasure Mobile app on the terminal device you want to use in combination with the device. device.
Page 7
Starts a recording of the determined Info button measured values for later evaluation. The indicated measured values will not be saved automatically. Info By tapping on the graphic display (9) you can switch over to the numeric display and vice versa. smartphone-controllable thermometer BT22WP...
Page 8
ð The appSensor determines the current measured value 2. Press the Stop recording button (21). which is then displayed on the terminal device. ð The context menu for saving the recording opens. 3. You can optionally save, discard or resume the measurement. smartphone-controllable thermometer BT22WP...
Page 9
Opens the input mask for logging recording data. 23 Discard button Stops the current recording of measured values. Discards the recorded measured values. 24 Continue button Resumes the recording of the measured values without saving. smartphone-controllable thermometer BT22WP...
Page 11
Creating a new customer App settings Proceed as follows to create a new customer: Proceed as follows to make settings in the Trotec MultiMeasure 1. Press the Customers button (38). Mobile app: ð The customers overview opens. 1. Press the settings button (41).
ð The appSensor is switched off. menu item Settings => Help. Selecting the menu item Help 2. You may now exit the Trotec MultiMeasure Mobile app on opens a link to the app's help page. You can open a drop-down the terminal device.
Disposal Declaration of conformity Always dispose of packing materials in an environmentally We – Trotec GmbH – declare in sole responsibility that the friendly manner and in accordance with the applicable local product designated below was developed, constructed and disposal regulations. produced in compliance with the requirements of the EU Radio Equipment Directive in the version 2014/53/EU.