You can download the current version of the instructions and • Observe the storage and operating conditions (see the EU declaration of conformity via the following link: Technical data). BT20 https://hub.trotec.com/?id=43281 insertion thermometer BT20...
Do not use the device in potentially explosive atmospheres, for Do not use abrasive cleaners or solvents to clean the measurements in liquids or at live parts. Trotec accepts no device. liability for damages resulting from improper use. In such a case, any warranty claims will be voided.
• protected from dust and direct sunlight Housing • the storage temperature complies with the values specified Penetration probe in the Technical data Protective cover • Batteries are removed from the device °C/°F button HOLD button ON/OFF button Display Battery compartment insertion thermometer BT20...
Switch-off The device switches off automatically after approx. 20 minutes so as to save the batteries. To switch off the device manually, press the ON/OFF button (5). Put the protective cover back onto the device. insertion thermometer BT20...
You can also find out about other return options that apply for many EU countries on the website https://hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment authorised for your country.