Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BP2F
Summary of Contents for Trotec BP2F
- Page 1 BP2F OPERATING MANUAL FOOD THERMOMETER...
-
Page 2: Table Of Contents
To use the device for its intended use, only use accessories and spare parts which have been approved by Trotec. food thermometer BP2F... -
Page 3: Information About The Device
To prevent damages to the device, do not expose it to extreme temperatures, extreme humidity or moisture. Designation Infrared sensor Note LED (illumination) Do not use abrasive cleaners or solvents to clean the device. Display Scan button LED button SET button Fold-out temperature probe Battery compartment food thermometer BP2F... - Page 4 Weight 150 g Length temperature 75 mm probe Dimensions 140 mm x 24 mm x 38 mm (length x width x height) Scope of delivery • 1 x Device BP2F • 2 x 1.5 V battery AAA • 1 x Quick guide food thermometer BP2F...
-
Page 5: Transport And Storage
2. Let go of the Scan button (4) to terminate the measurement. ð The most recent measured value is frozen and indicated on the display for approx. 7 s. ð The Hold indication is shown on the display. ð The IR measurement indication disappears. food thermometer BP2F... - Page 6 Please proceed as follows to change the temperature unit at the device: 1. Press the SET button (6) five times until the °C/°F indication flashes. 2. Press the Scan (4) or LED (5) button to set the desired unit. 3. Press the SET button (6) again to save the setting. food thermometer BP2F...
-
Page 7: Maintenance And Repair
Display segments are only on batteries and accumulators. Please dispose of batteries and The battery voltage is too low. faintly visible or flicker. accumulators according to the relevant legal requirements. Exchange the batteries The device displays immediately. implausible measured values. food thermometer BP2F... - Page 8 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...