11 Troubleshooting
If MIX is not working properly or the display
freezes, you can reset it without losing data:
How do I reset MIX?
•
Insert a pen tip or other object into the
reset hole located at the bottom of MIX.
Hold until the player shuts down.
•
If the reset option is unsuccessful, follow
the steps how to recover MIX with the
Philips Device Manager:
1
On your computer, select Start >
Programs > Philips > Philips MP3 player
> GoGear SA2MXX Device Manager to
launch the Philips Device Manager.
2
Turn off MIX before you continue.
3
Press and hold the volume button
you connect MIX to your computer.
4
Keep holding the key until the Philips
Device Manager acknowledges MIX and
enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect MIX from your computer.
7
Restart MIX.
EN
16
+
while