Update Mix; Manually Verify / Update Firmware - Philips GoGear SA2MXX/93 User Manual

10 Update MIX

MIX is controlled by an internal program called
firmware. Newer versions of the firmware may
have been released after you have purchased
MIX.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from MIX or download the latest
version from www.philips.com/support.
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect MIX to the computer (see
section Connect MIX to a computer for
instructions).
3
On your computer, click Start >
Programs > Philips > Philips MP3 player
> GoGear SA2MXX Device Manager
to launch the Philips Device Manager to
launch Philips Device Manager.
4
Click Update
» Philips SA2MXX Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows Update
completed, click OK.
6
Disconnect MIX from the computer.
» MIX restarts after the firmware is
updated and is ready for use again.
EN
15