IKEA SMAKSAK Manual page 53

ENGLISH
Heating
function
Microwave function at low
power (100 - 200 W).
To defrost meat, fish, bread,
Defrost
fruit and vegetables.
Creates the heat directly in
the food.
Do not preheat the oven.
Microwave function at medi-
um power (300 - 700 W).
To heat pre-prepared meals.
Reheating
Creates the heat directly in
the food.
Do not preheat the oven.
Caution! Use microwave glass
bottom plate only with
Microwave function.
Do not use microwave glass
bottom plate with Microwave
Combi function.
Setting a heating function
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select a heating function.
3. Turn the control knob to select the
temperature. Press
The lamp turns on when the oven operates.
4. To turn off the oven, turn the knob for
the heating functions to the off position.
Turn the control knob to change the
temperature during cooking. Turn the knob
for the heating function to change a heating
function during cooking and press
confirm.
Setting microwave function
1. Remove all accessories.
2. Insert microwave bottom glass plate.
Application
to confirm.
to
3. Turn the knob for the heating functions
to select the function:
Caution! Do not let the oven
operate when there is no food in
it.
Press to start with the default settings.
4. Press again and again to switch
between the settings for: Duration and
microwave power. Turn the control knob
to set the value and press
confirm.You can also press
change Duration in 30 seconds steps.
When the time set for Duration ends, the
signal sounds and the oven stops.
5. Turn the knob for the heating functions
to the off position to turn off the oven.
When you open the oven door, the oven
stops. To start it again, close the door and
press .
Setting function: Microwave Combi
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select the function
Caution! Do not let the oven
operate when there is no food in
it.
The display shows the default temperature.
3. Press to start.
4. Press again and again to change:
Duration, microwave power,
temperature. Turn the control knob to
set the value and press
Around 5 degrees before the set
temperature is reached the signal
sounds. When the set time ends the
signal sounds again and the oven stops.
5. Turn the knob for the heating functions
to the off position.
When you use this function with the time
set for more than 7 minutes, the
53
.
to
to
.
to confirm.