Table of Contents
Advertisement
This User's Manual is meant for studying of principles of functioning and operation of ShPS-
12, ShPS-12 mod.01, ShPS-12 mod.02, ShPS-12 mod.10, ShPS-12 mod.11, or ShPS-12 mod.12 Fire
Equipment Mount Box with Battery Backed Power Supply (hereinafter referred to as ShPS-12).
ShPS-12 mod.01 boxes differ from ShPS-12 boxes by a transparent window door; ShPS-12
mod.02 boxes differ from ShPS-12 boxes by IP54 ingress protection rating.
ShPS-12 mod.11 boxes differ from ShPS-12 mod.10 ones by a transparent window door; ShPS-
12 mod.12 boxes differ from ShPS-12 mod.10 ones by IP54 ingress protection rating.
ShPS-12 mod.10, ShPS-12 mod.11, ShPS-12 mod.12 boxes differ from ShPS-12, ShPS-12
mod.01, ShPS-12 mod.02 boxes by two separate RS-485 interface lines (instead of one line, see
Clause 1.2.9).
Only the personnel who have studied this manual are allowed to operation activities. All
activities on mounting, programming, and commissioning shall be performed in compliance with the
requirements of the regulatory documentation in force at the place of operation.
Abbreviations:
ADC:
Analog-to-Digital Converter
ShPS-12: ShPS-12, ShPS-12 mod.01, ShPS-12 mod.02, ShPS-12 mod.10, ShPS-12 mod.11, or
ShPS-12 mod.12 Fire Equipment Mount Box with Battery Backed Power Supply;
BK-12:
BK-12 or BK-12-RS485 (for ShPS-12 mod.10, ShPS-12 mod.11, ShPS-12 mod.12)
Switching Unit;
ISS:
Integrated Security System;
MIP-12: MIP-12 Power Supply Module.
1.1 Purpose
1.1.1.
ShPS-12 are meant to provide power supply for groups of housed fire protection equipment,
detectors, manual call points, fire and intrusion control and indicating equipment and other equipment
that require 12V/DC.
1.1.2.
An ShPS-12 box can accommodate the following Orion ISS devices: Signal-10, Signal-20P,
S2000-4, S2000-KDL, S2000-KPB, S2000-SP1, S2000-PI, S2000-KDL-2I, Rupor mod.02, S2000-
PGE, S2000-PGE mod.01, S2000-Ethernet, S2000-RPI and other devices mountable on a 35 mm top-
hat DIN rail in accordance with GOST R MEK 60715-2003.
1.1.3.
ShPS-12 mod.10, ShPS-12 mod.11, and ShPS-12 mod.12 are intended for operation with
Sirius Fire Alarm Control Panel and C2000M Monitoring and Control Panel for Fire and Intrusion
Alarm System and their modifications.
1.1.4.
Every ShPS-12 mod.10, ShPS-12 mod.11, or ShPS-12 mod.12 comprises a BK-12-RS485,
which features two separate RS-485 interface buses for connecting to other components of control and
indicating equipment outside the ShPS-12 and a single RS-485 interface bus for connecting to the
components of control and indicating equipment inside the box. An open or short circuit failure in any
external interface bus has no effect on operability of the other line.
1.1.5.
ShPS-12 boxes are designed for 24/7 continuous operation with intended output parameters,
automatic monitoring and charging of sealed backup batteries. ShPS-12 provide disconnecting backup
batteries from load circuits to avoid unacceptable discharge.
1.1.6.
ShPS-12 provide visual and audible indication of the following: availability of mains power,
backup
battery status,
circuit / overcurrent, charger faults, output overvoltage, status of communications over the RS-485
interface bus.
1.1.7.
The ShPS-12 provides overvoltage and short-circuit protection for 12V/DC outputs, with
output voltage restoring automatically after repairing an output short-circuit fault.
1.1.8.
ShPS-12 boxes provide short-circuit protection for battery connection terminals, with output
voltage being still effective when working on mains power supply.
1.1.9.
ShPS-12 boxes provide measurement of mains voltage, output voltage, battery voltage, and
output current (load current).
4
1 Description and Operation
missed
batteries,
disconnection
of
low
batteries,
output
short
Advertisement
Table of Contents
