Table of Contents
Advertisement
3.3 Maintenance Procedures
3.3.1 To inspect the ShPS-12 and batteries visually means to verify that it has no mechanical
damages and is fastened reliability, verify that conditions of connecting wires and contact joints are
good, and batteries are undeformed with no electrolyte leakage.
3.3.2 Inspecting of proper operation of ShPS-12 powered from both power supplies is conducted
against the procedures of 2.2.7.1-2) – 2.2.7.1-4).
Note: Operating temperatures above 25 degrees С dramatically reduce battery service life (see
specifications of the manufacturer of the battery installed).
3.4 Operability Testing
Test operability of the ShPS-12 in accordance with 2.2.7.1.
3.5 Technical Examination
Technical examination is not applicable for this equipment.
3.6 Preservation (Depreservation, Represervation)
Preservation is not applicable for this equipment.
Repair of faulty equipment is to be conducted by the manufacturer or in authorized repair centers.
The product shall be sent for repair in compliance with Company Standard QMS 8.5.3-2015, which
can be found online at our website
ATTENTION!
The manufacturer accepts no claims unless a malfunction report is applied.
Attention!
The equipment shall be submitted for repair being assembled and clean and along with all
the parts listed in the documentation.
Claims are accepted only if a reclamation report describing the failure in question is ap-
plied to the submitted equipment
A ShPS-12 failure resulted from consumer's not observing rules of mounting and operation is not a
reason for claims and warranty repair.
Warning!
Removing the PC board(s) of MIP-12 and/or BK-12 from the ShPS-12 cabinet
automatically voids the manufacturer's warranty
Claims should be submitted to the following address:
NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia
Phone/fax: +7 (495) 775-71-55 (PBX) E-mail:
In case of any issue related to use of the product, please contact the technical support: +7 (495) 775-
71-55 or e-mail:
support@bolid.ru
Storage in a transport container is permitted at ambient temperatures -30°С through +50°С and
relative humidity up to 95% at +35°С.
Storage in the consumer package is permitted only in heated premises at temperatures +5 through
+40°С and relative humidity up to 80% at +20°С.
The ShPS-12 box can be transported in a transport container at ambient temperatures minus 50
through +50°С and relative humidity up to 95 % at +35°С.
The product can be disposed of considering that there are no toxic components in it.
Batteries are classed as hazardous waste of Class II, so used up batteries shall be disposed of by a
specialized company that is licensed for this activity.
20
4 Repair
https://bolid.ru/support/remont/.
info@bolid.ru
5 Storage
6 Transporting
7 Disposal
Advertisement
Table of Contents
