Using The Appliance - Philips Golite Blu HF3332 User Manual

The display shows a timer countdown time of 15 minutes, but the
,
timer does not count down. It only starts to count down when the
timer time is adjusted.
The display shows an alarm time of 12:00 a.m. and shows the
,
normal clock time, but the alarm mode is off.
Note: The appliance remains turned on in demo mode until it is turned off.
To deactivate the demo mode, press and hold the on/off button for 10
seconds.

Using the appliance

Use this appliance for its intended household use as described in this
manual.
1 Press the on/off button briefly to turn on the appliance (Fig. 6).
The touchscreen display goes on.
,
Note: If you do not touch the display or press any button for 5 minutes when
the display is turned on and the appliance operates on battery power, the
appliance turns off automatically to save battery power.
Note: If you want to turn off the appliance, press and hold the on/off button
for 2 seconds.
2 Briefly press the on/off button again to turn on the LED panel.
The timer counts down the set time.
,
Note: The default session time is 15 minutes. Use the timer to change the
session time (see section 'Setting the timer' in chapter 'Preparing for use').
When the countdown is finished, the LED panel turns off
,
automatically.
Note: If you want to turn off the LED panel before the countdown is finished,
press the on/off button briefly.
3 Press the plus or the minus button to change the light
intensity (Fig. 9).
You can increase or decrease the intensity in increments of 25%.
4222.002.7504.1.indd 15
EnglisH
15
29-05-09 15:56