Emc Information - Philips Golite Blu HF3332 User Manual

EMC information

The goLITE BLU energy light should not be used adjacent to or stacked
with other equipment. If adjacent or stacked use is necessary, the goLITE
BLU should be observed to verify normal operation in the configuration
in which it will be used.
GUIDANCE AND MANUFACTURER'S DECLARATION —
ELECTROMAGNETIC EMISSIONS: The goLITE BLU is intended for use
in the electromagnetic environment specified below. The user of the
goLITE BLU should make sure it is used in such an environment.
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/Flicker emissions
IEC 61000-3-3
4222.002.7504.1.indd 25
E T
missions EsT
C
omplianCE
E
nvironmEnT
Group 1 The goLITE BLU uses RF
energy only for its internal
function. Therefore, its RF
emissions are very low
and are not likely to cause
any interference in nearby
electronic equipment.
Class B The goLITE BLU is suitable
for use in all establishments,
including domestic
establishments and those
Class A
directly connected to the
public low-voltage power
supply network that
Complies
supplies buildings used for
domestic purposes.
EnglisH
25
E
lECTromagnETiC
- g
uidanCE
29-05-09 15:56