DeWalt DCE088G18 Manual page 10

Contents
EN
• Laser Information
• User Safety
• Battery Safety
• Powering the Laser
• Operating Tips
• Turning the Laser ON
• Checking Laser Accuracy
• Field Calibration Check
• Using the Laser
• Maintenance
• Troubleshooting
• Accessories
• Service and Repairs
• Warranty
• Specifications
Laser Information
The DCE088G18 laser is a self-leveling laser tool that
can be used inside and outside for horizontal (level),
vertical and plumb alignment projects.
User Safety
Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
10
If you have any questions or comments about this
or any D WALT tool, go to www.2helpU.com.
E
WARNING:
Never modify the tool or any part
of it. Damage to the laser or personal injury
could result.
WARNING:
Read and understand all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do
not disassemble or modify the laser level.
There are no user serviceable parts inside.
Serious eye injury could result.
WARNING:
Hazardous Radiation. Use of
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
CAUTION: Keep fingers clear of the back
plate and stud when mounting with magnets.
Fingers may become pinched.
CAUTION: Do not stand underneath the laser
when it is mounted with the magnet bracket.
Serious personal injury or damage to the laser
may result if the laser falls.
The label on your laser may include the
following symbols.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser