Safety Instructions - uebe cyclotest mySense Instructions For Use Manual

Safety instructions

• The device must be used solely for the purpose described in these
operating instructions. The manufacturer shall not be held liable for
any damages resulting from improper use.
• Do not allow the thermometer to fall on the floor. The thermometer
is not shock-resistant or impact-resistant.
• Protect the device from dirt, dust and strong sunlight and keep the
device away from excessive heat or cold.
• Using the thermometer in a way that does not comply with the in-
tended operating conditions can result in inaccurate measurement
values.
• Before each measurement, check the integrity of the measuring tip.
A damaged measuring tip can cause injuries.
• Do not bite or bend the sensor. This can cause damage and lead to
malfunctions.
• The use of this device near mobile phones, radios or other strong
electromagnetic fields can cause errors and malfunctions. Maintain
a distance of at least 3.3 metres from such devices when using the
device.
• The thermometer contains small parts that could be swallowed by
children. Do not leave the device unattended with children.
• Do not open the device (except when changing the battery).
• If the device is not being used for an extended period of time, re-
move the battery.
• Always store the thermometer in the protective cover.
EN-4
• If the device has been stored at temperatures below 10°C or above
40°C, allow it to stand at room temperature for at least 2 hours be-
fore using it.
Safety instructions
EN-5