Physical Boundary - ATEN CS1182DP4 Instructions Manual

Hide thumbs Also See for CS1182DP4:
Table of Contents

Advertisement

Security Target
A detailed description of the TOE security features can be found in Section 6 (TOE Summary Specification).

2.3.1 Physical Boundary

The TOE includes the RPS and hardware models identified in Section 1.1 along with embedded firmware
v1.1.101 and corresponding documentation identified in Section 2.5 below.
An optional KVM cable set (not supplied with the TOE) is available as a separate purchase. The KVM cable
sets are built for the KVM connection to the PCs, providing better compatibility. Users can connect the
KVM and PCs using their own cable sets as long as the protocols are compatible but the vendor cable sets
are recommended. The TOE was tested using the cable sets mentioned above and the following adapters:
UC32381 (USB-C to HDMI converter)
UC3239 (USB-C to DP converter)
VC986 (Active DP-to-HDMI adapter)
VC965 (Active DP-to-DVI adapter)
While the cable sets and adapters were supplied, they were not included in the evaluation because they
are considered part of the operational environment, along with the switched PCs, peripheral devices,
DisplayPort / HDMI / DVI-I monitors, USB keyboard, USB mouse, 3.5mm audio output (e.g. speakers) and
the host computers.
The following figure shows a representative TOE and its environment. In particular, it shows a four port,
single-head KVM and its connections.
11
Version 1.1
2022-03-08

Advertisement

Table of Contents
loading

Table of Contents