Replacement Of The Internal Battery - Seco TANARO Series Product Manual

Do not dispose of used CMOS batteries in domestic waste.
Dispose of the battery according to the local regulations dealing with the disposal of these special
materials (e. g. to the collecting points for disposal of batteries).
7.2

Replacement of the Internal Battery

The internal battery is placed as per figure below.
For replacement, the SD-card and the back cover have to be removed.
The device shall be opened by authorized and skilled personnel only.
Danger of electric hazard! First before opening, please make sure that the unit is completely
disconnected from any power supply, direct or indirect. In order to remove the back cover all other
connectors must be removed as well. Please make sure that the SD-card has been removed as it
blocks the cover. Furthermore take care about the socket and connectors. Especially the micro USB
remove
remove
connector might be damaged easily.
TANARO
(Exemplary Illustration. It shows the TANARO 7.0" BX.)
X117
PRODUCT MANUAL
TANARO
Position of the battery
remove
remove SD-card
1
remove
2 7