Sharp SJ-FS810V-WH Service Manual page 42

SJFS810VWH
2-6. Ice maker T-S ass'y
Harness cover
L-band c
1) Put Thermistor on back side of Ice cube tray at .
Put Selar on Thermistor , cover them with Thermistor cover and fix by 4 claws and square holes.
square hole
2) Set the Ice cube heater along the groove on back side of Ice cube tray at.
I-grill
Ice maker ass'y
Ice senser
Thermistor cover
Sealer
claw
Thermistor
Ice cube tray at
Ice cube heater
Line up protect tube edge and rib of the boss
Line up mold edge and the rib
set tight
Touch the edge of protect tube and the boss
Nylon band
Ice cube maker
Ice cube tray at
Thermistor
Thermistor cover
Sealer
Ice cube heater
Ice heater cover t
Ice cube tray at Thermistor
rib
marked wire
Ice cube tray at
42
Set the rib between
the 2 lead wires.
rib
set loose