Sharp SJ-FS810V-WH Service Manual page 34

SJFS810VWH
1-4. Assembling procedures of Pump unit ass'y
1) Insert joint packing and joint pipe to gear pump.
*Insert it enough
Joint pipe is vertically.
Joint packing
Gear pump
2) Stick pump base sealer to pump base.
Set 1) assy to pump base and put harness of gear
pump.
4) Close pump base.
*Fix joint packing to pump base.
*Hook of pump base enough.
Joint pipe
Joint pipe
(13)
Gear pump
Pump base sealer
Pump base
3) Fix packing holder by tapping screw.(2 places)
Packing holder
Pump base
Pump base sealer
34
Tapping screw
Joint packing
Joint pipe
Gear pump