Related Manuals for Trane GEHB018
Summary of Contents for Trane GEHB018
- Page 1 Installation Crankcase Heater Wiring For KIT14712 and KIT14718 Models: GEHB018, GEVB018, KIT14712, KIT14718 PART-SVN100A-EN...
- Page 2 Installation Literature change history PART-SVN100A-EN (October 2006) manual first release. Warnings and Cautions NOTICE: Warnings and Cautions appear at appropriate sections throughout this literature. Read these carefully. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
- Page 3 Installation 3 Connect new blue wire 3 to incoming compressor power and terminal 1 on the new relay 4 Connect new black wire 4 to the second incoming compressor power and terminal 4 on the new relay. 5 Connect crankcase heater wires to terminals 2 and 5 on the new relay. 6 Connect the new relay coil (double tab terminals) to the terminals 4 and 6 on the customer terminal block.
- Page 4 Stocking Location Electronic only www.trane.com Trane has a policy of continuous product data and product improvement and reserves the right to For more information, contact your local Trane change design and specifications without notice. Only qualified technicians should perform the office or e-mail us at comfort@trane.com...