Safety - Tech Controllers EU-M-8N User Manual

I.

SAFETY

Before using the device for the first time the user should read the following regulations carefully. Not obeying the rules
included in this manual may lead to personal injuries or controller damage. The user manual should be stored in a safe place
for further reference. In order to avoid accidents and errors, it should be ensured that every person using the device has
familiarized themselves with the principle of operation as well as security functions of the controller. If the device is to be
put in a different place, make sure that the user manual is stored with the device so that any potential user has access to
essential information about the device. The manufacturer does not accept responsibility for any injuries or damage resulting
from negligence; therefore, users are obliged to take the necessary safety measures listed in this manual to protect their lives
and property.
WARNING

A live electrical device! Make sure the regulator is disconnected from the mains before performing any activities
involving the power supply (plugging cables, installing the device etc.)

The device should be installed by a qualified electrician.

Before starting the controller, the user should measure earthing resistance of the electric motors as well as the
insulation resistance of the cables.

The regulator should not be operated by children.
WARNING

The device may be damaged if struck by a lightning. Make sure the plug is disconnected from the power supply
during storm.

Any use other than specified by the manufacturer is forbidden.

Before and during the heating season, the controller should be checked for condition of its cables. The user should
also check if the controller is properly mounted and clean it if dusty or dirty.
Changes in the merchandise described in the manual may have been introduced subsequent to its completion on 22.02.2021.
The manufacturer retains the right to introduce changes to the structure or colours. The illustrations may include additional
equipment. Print technology may result in differences in the colours shown.
We are committed to protecting the environment. Manufacturing electronic devices imposes an
obligation of providing for environmentally safe disposal of used electronic components and
devices. Hence, we have been entered into a register kept by the Inspection for Environmental
Protection. The crossed-out bin symbol on a product means that the product may not be
disposed of to household waste containers. Recycling of waste helps to protect the environment.
The user is obliged to transfer their used equipment to a collection point where all electric and
electronic components will be recycled.
4