Download Print this page

Raider Power Tools RD-GG02 Original Instruction Manual page 11

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
1.25. Include only those items whose data voltage are compatible with the output voltage
of the electric generator. Do not include devices with maximum power greater than 2.0 kW.
1.26. Never connect appliances to the generator before you have started
1.27. Use only insulated protective devices.Do not touch any mechanically driven or hot
parts. Do not remove any protective coating.
1.28. The generator must not be exposed to moisture or dust ..
1.29. Gasoline is very flammable! Store gasoline only in designated containers
1.30. Charge petrol only outdoors and do not smoke while charging
1.31. While the engine is running or still warm, do not remove the cap of the petrol tank and
charge the generator with fuel. When loading use funnels or tubes appropriate for that not to
spill gasoline on generator. If you spill fuel dry it immediately.
1.32. Do not store the generator in a closed room, when there is fuel in the tank. Vapors
may cause fire.
1.33. Empty fuel tank and carburetor if you will not use the generator for a long time or will
you transport-in support.
1.34. Do not use gasoline to clean the machine and engine.
1.35. Keep the used oil in the original package and hand processing of the designated
areas.
2. Purpose of the unit.
Generator RAIDER RD-GG02 is intended to supply hand-held power tools or appliances
with maximum power to about 2000 W (notice that some appliances have larger starting power
than the one that is marked for them)
The generator is not suitable for powering computers and other precision
technique.
The generator is equipped with a AC 230 V and DC output 12 V, which is used to charge the
batteries.
The generator is equipped with an automatic voltage regulator (AVR).
3. Working with the device.
3.1. Starting the gasoline engine.
Before starting the gasoline generator, make sure that no consumers are plugged. Check
the fuel level, possibly add.
Check the oil – should be SAE 10W-30 or SAE 15W40.
Ensure sufficient ventilation of the unit.
Ensure that the ignition cable is attached to the spark plug.
Consider the immediate environment of the electric generator.
Turn off any electrical appliance switched from electric generator.
When starting, wear protective gloves.
1. Submit fuel by turning the faucet turned on Figure 1
11

Advertisement

loading