Download Print this page

Raider Power Tools RD-GG02 Original Instruction Manual page 10

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
10
www.raider.bg
Depicted elements:
1. Protection against overload (current protection)
2. DC output of 12V
3. Output 230V
4. Fuse
5. Voltmeter
6. Cap Oil (gauge)
7. Sensor for oil
8. Power switch (starting switch)
9. Hand starter
10. Tap for fuel
11. Air filter
12. Cover the tank
1. Safety Guidelines
In use of the devices must comply with certain precautions associated with safety to prevent
injury and damage. For this purpose, carefully read the safety instructions. In case you need to
pass the instrument of others, please hand them this instruction manual. "Euromaster Import
Export" Ltd accepts no liability for accidents or damage that occurs due to non-observance of
this manual and safety instructions.
1.1. Should not be made any changes to the generator. For maintenance and accessories
should be used only original parts.
1.2. Altering the engine speed beyond the factory setting is prohibited.
1.3. The use of the generator for industrial supply.
1.4. Connecting the generator to the building installation is prohibited.
1.5. It is prohibited to connecting two or more generator with each other.
1.6. Exhaust gases must not breathe because of the risk of poisoning.
1.7. Do not let near children and animals when the generator is running.
1.8. Risk of burns - do not touch the exhaust (muffler) and the drive unit.
1.9. Gasoline and gasoline vapors are flammable respectively explosive.
1.10. Never use electric generator in rooms with combustible materials - risk of explosion.
Do not use a generator indoors, since the engine produces poisonous gases at work.
1.11. Place the generator at least 1 meter away from buildings and other equipment,
flammable substances (tubes and barrels of gasoline and other fuels)
1.12. Never smoke near the generator.
1.13. Try not to spill fuel around the opening of the tank. In case spill clean carefully and
wait enough to dry, then do not start the car engine.
1.14. During transport generating must be secured against slipping and overturning.
1.15. If you want to ship the unit, empty before the petrol tank
1.16. Place generator on a flat surface. The placement of the generator at an incline may
lead to spillage.
1.17. When transporting or refueling always turn off the engine.
1.18. Do not charge near open lights, fire or sparks flying, empty tank
1.19. Do not touch any mechanically driven or hot parts. Do not remove any protective
coating.
1.20. Do not expose the generator under the influence of rain or high humidity.
1.21. The generator is driven by an internal combustion engine, which in the area of the
tailpipe (on the opposite side of the outlet) and the exhaust outlet induces incandescence.
Avoid the proximity of these surfaces because of risk of skin burns.
1.22. Beware of electrical hazards. Outdoor use only authorized for that extension cords.
The lengths of the wires to the consumer should be as short as possible.
1.23. Do not plug the generator into household electricity - it can cause damage to the
generator or other electrical appliances in the home.
1.24. Do not touch the generator with wet hands while working. Electric power wires and
included appliances must be in perfect condition.

Advertisement

loading