Advertisement
Quick Links
ASSEMBLY INSTRUCTION
KORI BUFFET
ITEM CODE 61066
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
1500mm
Imported by
Amart Furniture
Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture,
Customer Service Free call 1800 351 084
Item Code: 61066
2017-6-10
1-13
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Amart Furniture KORI 61066
Summary of Contents for Amart Furniture KORI 61066
- Page 1 ASSEMBLY INSTRUCTION KORI BUFFET ITEM CODE 61066 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084 1500mm Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
- Page 2 2000MM 2017-6-10 Item Code: 61066 2-13...
- Page 3 2017-6-10 3-13 Item Code: 61066...
- Page 4 CHECKLIST Before you start..1.Choose a clean,level,spacious assembly area. Avoid hard surfaces that may damage the product. 2.Check and ensure that you have all required contents for complete assembly. 3.Always read the assembly instructions carefully before beginning assembly. 4.The packaging and contents can be a choking hazard. Please keep out of reach of small children at all times.
- Page 5 CAM LOCK INSTALL METHOD AS FOLLOWS 1.1cm Step 1 Step 2 Step 3 Lock Fix cam nut into the bottom of hole then tighten it. Item Code: 61066 5-13...
- Page 6 (MM) 375x544x18 375x544x18 468x140x18 544x393x18 544x393x18 477x373x18 1500x395x18 538x481x15 538x481x15 1492x281x2.7 330x140x15 330x140x15 412x140x15 324x422x2.7 481x177x15 1500x395x18 481x177x15 Item Code: 61066 2017-6-10 6-13...
- Page 7 18xI 3xCL 3xCR STEP 1:fix cam pin(c)to panel Install runner (CL)&(CR) to panel (1)&(2) with screws (I) . Please pay attention to screw location as shown in diagram. STEP 2:Fix panel (3) between side panel (1)&(2), using screw (A) and dowel (B). 2017-6-10 Item Code: 61066 7-13...
- Page 8 STEP 3: Fix cam pin (C)to panel (4)&(5). STEP 4:Attach panel (6) to the body with dowel (B) and cam lock parts (D)&(C). Item Code: 61066 2017-6-10 8-13...
- Page 9 STEP 5:Fix bottom panel (16) to the body ,with dowel (B) and screws(A). 20xF STEP 6:Install metal leg (E) to the body with screw(F). 2017-6-10 Item Code: 61066 9-13...
- Page 10 STEP 7:fIix metal tube(N) to metal leg with screw(J). STEP 8:Fix top panel (7) to the body with dowel(B)and cam lock parts (C)&(D). TURN OVER Item Code: 61066 2017-6-10 10-13...
- Page 11 Kx30 STEP 12:Join two back panels with filler (P), and attach back panel (10) to the body with screw (K). 16xI STEP 9:Install hinges and handle as shown in diagram. Item Code: 61066 2017-6-10 11-13...
- Page 12 3xDR 3xDL 18xI 12xO 12xC 12xD 3xL STEP 10:Install drawers as shown in diagram. 1A:Fix cam lock (C) and handle(L) to 2:Join side panels (11)(12) and back drawer front (15/17) panel(13) with screws (O). 3A:Put bottom panel (14) into groove 4:Install runner(DR)(DL) to the bottom of drawer of panel(12)(11)and (13).
- Page 13 ASSEMBLY COMPLETE DO NOT PUSH OR DRAG THIS FURNITURE – IT WILL CAUSE DAMAGE TO THE LEGS Item Code: 61066 2017-6-10 13-13...
- Page 14 STEP 1: Fix bracket to back panel using screws M3.5*14MM . NOTE are used. Failure to do so may result in personal injury or cause property damage if the product topples over. Please note that the screws are only suitable for plasterboard wall materials, please contact local hardware store for corresponding screws for other wall materials.
- Page 15 STEP 2: Fix bracket onto the wall using screws M4*30MM. Furniture top Wallboard Bracket...
- Page 16 SAFETY BRACKETS INSTRUCTIONS 1.Attach a bracket to the wallboard with the long screws provided. 2.Attach a bracket to the furniture frame under the top with the short screws provided. 3.Move the furniture into its final position. Thread a strap through the bracket as shown in the illustration, tighten strap until snug.
-
Page 17: Product Care
PRODUCT CARE: To protect your furniture,we suggest the following: *Avoid placing your furniture in direct sunlight. *Do not place furniture directly under windows. *Do not place sharp materials(knife,fork,etc) directly onto your furniture as sharp material may scrape and damage the finish. Do not place material with high temperature directly onto the surface of your furniture.
Need help?
Do you have a question about the KORI 61066 and is the answer not in the manual?
Questions and answers