Table of Contents
Advertisement
PRINTING IMAGES
To configure print settings for all images
1.
In the PLAY mode, press [MENU].
2.
EX-Z7: Select the "PLAY" tab, select "DPOF
Printing", and then press [ ].
EX-Z6: Select the "PLAY" tab, select "DPOF",
and then press [ ].
3.
Use [ ] and [ ] to select "All images", and
then press [ ].
4.
Use [ ] and [ ] to
specify the number of
copies.
• You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.
To turn on date stamping for the prints, press
[BS] so "On" is displayed.
• "On" indicates that date stamping is turned on.
• Turning on date stamping while "00" is specified for
the number of copies will cause the number of copies
to change to "01". Any other number of copies setting
will remain the same when you turn on date
stamping.
• To turn off date stamping for the prints, press [BS] so
"Off" is displayed.
6.
After all the settings are the way you want,
press [SET] to apply them.
181
Advertisement
Table of Contents
