Table of Contents
Advertisement
3. Screw the DIN rail mounting adapter
torque 0.8 Nm). The mounting material is supplied with the DIN rail mounting adapter.
4. Place the device on the upper edge of the DIN rail
5. Press the device against the DIN rail
6. Connect the power supply, refer to the section "Power supply (Page 55)".
7. Fit the antennas, refer to the section "Antennas (Page 57)".
Uninstalling
1. Turn off the power to the device.
2. Disconnect all connected cables.
SCALANCE WxM763
Operating Instructions, 03/2022, C79000-G8976-C653-01
5.4 Installing on the DIN rail
to the bottom of the device (M3 x 8, tightening
.
until the DIN rail slider catch locks in place.
Installation and removal
43
Advertisement
Table of Contents
