Advertisement
Quick Links
56 Volt Lithium-Ion Battery Cordless Cylinder Mower
Model Numbers: STIR43 / 1 and STIR51 / 1
OPERATOR'S MANUAL
For serial numbers: STIR43/1-21-0001 & STIR51/1-21-0001 onward
Original instructions: English version
Allett Limited, Regal House, Airfield Industrial Estate, Hixon, Stafford, ST18 0PF, United Kingdom
Tel: +44 (0) 1889 271503
sales@allett.co.uk
www.allett.co.uk
For Allett spare parts tel: +44 (0) 1889 27209
F016J13542-A ISSUE 28-01-22 SE
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Allett Stirling 43
Summary of Contents for Allett Stirling 43
- Page 1 Model Numbers: STIR43 / 1 and STIR51 / 1 OPERATOR’S MANUAL For serial numbers: STIR43/1-21-0001 & STIR51/1-21-0001 onward Original instructions: English version Allett Limited, Regal House, Airfield Industrial Estate, Hixon, Stafford, ST18 0PF, United Kingdom Tel: +44 (0) 1889 271503 sales@allett.co.uk www.allett.co.uk...
- Page 2 READ THIS MANUAL BEFORE USING AN ALLETT STIRLING 43 OR 51 CYLINDER MOWER YOUR SAFETY IS INVOLVED IT IS ESSENTIAL THAT OPERATORS STUDY THIS DOCUMENT FOR THEIR OWN SAFETY F016J13542-A ISSUE 28-01-22 SE...
- Page 3 Operating controls Handle Battery dock HiteRite™ grip Cartridge clamp Grass bag Front roller ⑨ Cartridge securing lever Quick adjust lever (handle pivot) ① Handle locking clamp RotoShift™ grip Cylinder bail bar Safety button ⑧ RotoShift™ switch ② Battery release button Power indicator ③...
- Page 4 F016J13542-A ISSUE 28-01-22 SE...
- Page 5 ① ② ③ F016J13542-A ISSUE 28-01-22 SE...
- Page 6 F016J13542-A ISSUE 28-01-22 SE...
- Page 7 F016J13542-A ISSUE 28-01-22 SE...
- Page 8 The safety precautions outlined in this manual and all other generally recognised regulations on safety must be observed at all times. Any modifications carried out to a Stirling mower will relieve Allett Limited of liability for any resulting damage or injury.
- Page 9 Explanation of symbols on the lawnmower General hazard safety alert Read instruction manual Beware of thrown or flying objects Keep bystanders at a safe distance from machine Switch off and remove isolation key before adjusting, cleaning and before leaving the lawnmower unattended for any period. Sharp blade(s).
- Page 10 Never allow people unfamiliar with these instructions to use the lawnmower. Local regulations may restrict the age of the operator. This machine is not intended for use by children or by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the machine by a person responsible for their safety.
-
Page 11: Technical Data
Keep all nuts, bolts, and screws tight to be sure that the lawnmower is in safe working condition. Check the grass catcher frequently for wear or deterioration. Replace worn or damaged parts for safety. Ensure replacement parts fitted are approved TECHNICAL DATA Designation: Stirling 43 battery Stirling 51 battery Cylinder lawnmower Cylinder lawnmower Machine Model/type STIR43/1... - Page 12 ASSEMBLY Assembling the handle to the mower (See Fig. A) WARNING! - Remove the battery from the mower to prevent accidents during assembly Locate the electrical connector on the handle, next locate the mating connector one on the mower. The connector on the mower will be on the rear right-hand side near the base of the top cover.
-
Page 13: Batteries And Charging
BATTERIES AND CHARGING Checking battery capacity (See Fig. D) Press the power button on the battery (See Figure D) to display the charge level or its working condition via the 5 LED indicator. The charge levels are as follows: Battery charge 5-LED level / working Remarks... - Page 14 Charging the battery NOTE: The battery is not shipped fully charged. It is recommended to fully charge before use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time.
- Page 15 BATTERY AND CHARGER RECOMMENDATIONS The charger is for indoor use only Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs.
- Page 16 Flashing orange The mower is overloaded cut height to decrease the load Red and green flashing Contact Allett Communication timeout alternately Starting and stopping (See Fig. F – I) The blade continues to rotate for a few seconds after the machine is switched off. Allow the motor/blade to stop rotating before switching “on”...
- Page 17 To turn the self-propel off Release the self-propel switch and turn the RotoShift™ grip off until it can’t be rotated. (Fig. I) ADJUSTMENTS Speed adjustment The speed of the self-propel drive can be adjusted to suit your walking pace by turning the RotoShift grip forwards (see Fig.
- Page 18 Adjusting the blade (See Fig. O & R) The blades are correctly adjusted when the cutting cylinder (reel) lightly brushes the bottom blade (bed knife) across the full width as the cylinder is turned. The blades act like a pair of scissors. As a test, correctly adjusted blades will cut a piece of good quality writing paper (80g/m ) across the width of the blade.
- Page 19 The cylinder (reel) and bottom blade (bed knife) can be re-sharpened. This is recommended every 2-3 years or as required. Blunt or dull blades will adversely affect cutting performance and battery life. Please contact your local dealer for information. You can search for your nearest registered dealer on-line at www.allett.co.uk/allett-dealer- locator Cleaning and Storage Clean the mower, battery and charger with a soft dry brush or cloth.
- Page 20 DRIVE BELT ROUTING DIAGRAM ITEM NO. PART NUMBER DESCRIPTION F016J13298 CARTRIDGE DRIVE BELT F016J13342 REAR ROLLER DRIVE BELT F016J13542-A ISSUE 28-01-22 SE...
-
Page 21: Fault Finding
FAULT FINDING FAULT POSSIBLE CAUSE Battery not pushed fully home in battery Check the battery is pushed fully into the dock battery dock until it clicks Battery not charged Check the battery has charge Check the isolation key is located safely in Isolation key (16) not fitted correctly the slot (16) Cartridge or rear roller drive does not start... - Page 22 Notified body: Vincotte NB0026, Jan Olieslagerslaan 35, 1800 Vilvoorde, Belgium Noise Report ref: NBER-ALLETT-020 / NBER-ALLETT-021 Technical file at: Allett Ltd, Regal house, Staffordshire, ST18 0PF I hereby declare that the equipment named above has been tested and found to comply with the relevant sections of the above referenced specifications.
- Page 23 You must contact the place of purchase and report the problem to them. You need to have your proof of purchase and guarantee. If the dealer cannot assist in finding a solution to the problem reported, please contact Allett to report any unresolved issues.
Need help?
Do you have a question about the Stirling 43 and is the answer not in the manual?
Questions and answers
My Stirling 43 cutting barrel is my parallel with the rear and front roller by 11/2mm. Is there instructions manual to fix this??