Erasing A Stored Entry; Calling Someone With The Speed Dialer - Panasonic KX-TS4200 Operating Instructions Manual

Erasing a stored entry

Important:
L Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select "Phone Setup", then press
{MENU/SET}.
3
Select "Speed Dial", then press
{MENU/SET}.
➔Speed Dial
Language
Extension No.
[V/^]:Scroll
4
Select "Edit/View SPD", then
press {MENU/SET}.
➔Edit/View SPD
SPD Preference
[V/^]:Scroll
5
Press the speed dial button ({1} to
{16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
Edit/View SPD
Select SPD Key
6
Press {ERASE}.
7
Select "Yes?", then press {ERASE}
or {MENU/SET}.
L To cancel, select "No?", then press
{MENU/SET}.
8
Press and hold {MENU/SET} to
return to standby mode.
Note:
L To return to the previous menu, press
{<}.
For assistance, please visit http://www.panasonic.com/phonehelp
Calling someone with the
speed dialer
If speed dial preference is set to
"CO Call"
Press the desired speed dial button ({1}
to {16}).
OR
Press {LOWER}, then press the desired
speed dial button ({1} to {16}).
If speed dial preference is set to
"Intercom DSS"
1
Lift the handset or press
{SP-PHONE} or a line button.
2
Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{16}).
If speed dial preference is set to
"Preview Memory"
1
Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{16}).
L You can review the entries by
pressing {V} or {^}.
2
Lift the handset or press
{SP-PHONE} or a line button.
Speed Dialer
37