Registering A Unit; Erasing An Entry; Mbn: "Yes" A Mselectn A Moffn - Panasonic KX-PRW120 Operating Instructions Manual

Programming
3
MMenuN a MbN: "Add new entry" a
MSelectN
4
Edit the date if necessary. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (30 characters max.;
page 17). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times
R You can select "Off" if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MOFFN
Note:
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1
MMenuN (right soft key) a
MSelectN
2
To see the entries on the selected date,
press MSelectN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: "Detail" a
MSelectN
Editing an entry
1
MMenuN (right soft key) a
MSelectN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Edit" a MSelectN
4
Edit the date if necessary. a MOKN
5
Edit the time if necessary. a MOKN
6
Edit the text memo if necessary (30
characters max.). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times a MOFFN
32 For assistance, please visit http://www.panasonic.com/help

Erasing an entry

Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
MMenuN (right soft key) a
MSelectN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Erase" a MSelectN
4

MbN: "Yes" a MSelectN a MOFFN

Erasing all entries
1
MMenuN (right soft key) a
MSelectN
2
MListN a MMenuN
3
MbN: "Erase all" a MSelectN
4
MbN: "Yes" a MSelectN
5
MbN: "Yes" a MSelectN a MOFFN

Registering a unit

a
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
a
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
MMenuN (right soft key) #130
a
a