Table of Contents
Advertisement
58 Chapter 2 Configuring servers
4
5
6
7
8
9
10 Optionally, you can select an Exclusion Range for further control of the IP
11 On the Pool Exclusion window:
12 Optionally, you can force the DHCP server to assign a fixed IP address to a
NN46110-600
Click Add in the Standard Options section to access the Add Option
window. The standard options section shows the current status of any added
options and lets you add new options:
•
Select the desired options from the list.
•
Select the desired Type from the list.
•
Enter the appropriate value.
In the Pool section, click Add to add a pool.
In the Add Pool window:
a
Enter the base IP address for the pool.
b Enter the subnet mask for the pool.
c
Enter a pool name. The pool name must match the group profile for
DHCP.
d Enter a description of the pool.
e
Click OK.
Select Pool and click Configure to return to the Pool window.
Use the Inclusion Range section to add blocks of IP addresses that you can
then give out. Under Inclusion Range, click Add.
In the Pool Inclusion window:
a
Enter the base IP address for the Start Address.
b Enter the End IP address.
c
Click OK.
addresses that you give out. Under Exclusion Range, click Add.
a
Enter the Start Address for the range.
b Enter the End Address for the range.
c
Click OK.
host every time it logs in. You can do this with host reservations under the
Host section. Click Add.
Advertisement
Table of Contents
