Table of Contents
Advertisement
56 Chapter 2 Configuring servers
4
5
6
7
8
9
10 Enter the server port number that you want the RADIUS accounting requests
11 Enter the external RADIUS server's required secret (password).
12 Reenter the remote server's secret (password) to verify that you typed the
13 Click Test Server to verify the connectivity from your VPN Router to the
The VPN Router sends RADIUS accounting start and stop records to an external
RADIUS server. These interim records provide information about the currently
active sessions on the VPN Router. An administrator can use this information to
evaluate VPN Router usage, such as connection start and stop times.
NN46110-600
the local disk. In the event of a system crash, upon reinitialization the VPN
Router translates the journal file into a series of stop records on a per-session
basis. This minimizes accounting data loss. A low interval creates system
overhead and requires additional processing. The default interval is 00:10:00
(10 minutes).
In Remove Accounting Files, enter the number of days before the files are
removed.
Click Enable to enable the Interim RADIUS Accounting Record feature.
This selection is enabled by default.
In the Interim Update Interval, enter the interval at which time interim
RADIUS records are sent to the specified external RADIUS server. Use the
format hh:mm:ss for the interval. A short interval creates system overhead
which requires additional processing. The default interval is 00:10:00 (10
minutes).
Click Enable to send accounting records to the external RADIUS accounting
server.
Enter the external RADIUS server host name or IP address. If you enter a host
name, use a fully qualified domain name, such as Finance.mycompany.com.
Click Private or Public for the Interface.
to use. The default is port 1646.
password correctly.
external RADIUS server. A message at the top of the window shows the
results of the test.
Advertisement
Table of Contents
