Example Of Connecting To Video Equipment; Example Of Connecting To Computer - Panasonic PT-L780NTU Operating Instructions Manual

Example of connecting to video equipments
D-sub 15 (male) - BNC5 (female)
Computer for
adapter cable (sold separately)
control use
Red (connect to P
Blue (connect to P
Green (connect to Y signal connector)
D-sub 9-pin
(male)
DVI-D IN
USB RGB1 IN RGB2 IN/RGB OUT
SERIAL
R/R-Y/P G/Y B/B-Y/P SYNC/HD VD
REMOTE R B
RGB3 IN
DVD player
Red (connect to P signal connector)
R
Blue (connect to P signal connector)
B
Green (connect to Y signal connector)
NOTE:
B Only one audio system circuit is available for the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.
B Only one audio system circuit is available for the RGB AUDIO IN jacks, so
if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
B If an audio system is connected to the AUDIO OUT jack, the sound
volume balance can be controlled by the remote control unit which is
supplied with the projector.
B If the video signal source is connected using a cable with a BNC
connector plug, use a BNC/RCA adapter (sold separately) to convert the
cable end to an RCA plug-type jack.
B Refer to page 61 for a list of compatible YP
to the projector.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
24
signal connector)
R
signal connector)
B
Digital broadcast
tuner or DVD player
DVD player
S-VIDEO IN
L
AUDIO OUT
R
RGB AUDIO IN AUDIO IN
VIDEO IN
Video deck
Audio system
P signals which can be input
B R

Example of connecting to computer

Computer for
control use
D-sub 9-pin
(male)
USB SERIAL RGB1 IN RGB2 IN/RGB OUT
R/R-Y/P G/Y B/B-Y/P
REMOTE R
RGB3 IN
Computer
Computer with
DVI-D OUT connector
NOTE:
B It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
B Refer to the list of compatible signals on page 61 for the types of RGB
signals which can be input to the projector by connecting a computer.
B Do not input the signal to the RGB2 IN/RGB OUT connector when the
RGB2 SELECT item in the OPTION menu is set to OUTPUT. (Refer to
page 44.)
Refer to the accessory CD-ROM for details on connecting the
projector to a personal computer by means of a wireless or wired
network using an optional wireless card or projector LAN card.
(PT-L780NTU only)
Computer
Monitor
ON DIP
1 3 2 5 4 6
S-VIDEO IN
L
DVI-D IN
AUDIO OUT
R
RGB AUDIO IN AUDIO IN
VIDEO IN
SYNC/HD VD
B
Audio system
DVI cable (Option)
(ET-SCDV03)
25