Adjusting The Picture; Picture Mode; Color Hue Setting; Color - Panasonic PT-L780NTU Operating Instructions Manual

Adjusting the picture

Select the item pressing the F or G
buttons on the remote control unit or
the projector.
Press the I or H buttons to set the
selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the I or H
buttons to adjust the setting.
When an RGB/DVI signal is being
input
When a YP P signal is being input
B R
36
When an S-VIDEO/VIDEO signal is
being input
When the NETWORK/SD CARD is
selected (PT-L780NTU only)

PICTURE MODE

Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular lighting conditions in use,
select STANDARD. For
exceptionally bright rooms, use
DYNAMIC.
Color Hue Setting (color
temperature)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.

COLOR

(S-VIDEO/VIDEO/YP P only)
B R
Press the H button to make the
color more vivid in tone, and press
the I button to make the color
more pastel in tone.

TINT

(NTSC/NTSC 4.43/YP P only)
B R
This adjusts the flesh tones in the
picture. Press the H button to make
flesh tones more greenish, and
press the I button to make the
flesh tones more reddish.

BRIGHT

This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the I button if black areas are
too light (grey rather than black).

CONTRAST

This adjusts the contrast of the
picture. Press the H button to make
the picture brighter, and press the
I button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)

SHARPNESS

Press the H button to make the
picture details sharper, and press
the I button to make the picture
details softer.
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YP P
B R
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the H button. To turn it off , set
to "0" by pressing the I button.

TV SYSTEM

(S-VIDEO/VIDEO only)
AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
B This should normally be set to
"AUTO1" or "AUTO2". If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.
37