Connections; Notes On Connections; Example Of Connecting To Video Equipment; Example Of Connecting To Computer - Panasonic PT-AE100U Operating Instructions Manual

Connections

Notes on connections

B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.

Example of connecting to video equipment

DVD player
To audio
output
To audio
input
or
Audio
system
To audio
output
Video deck
NOTE:
B Only one audio system circuit is available for the AUDIO L-R input jacks
for S-VIDEO/VIDEO signals, so if you wish to change the audio input
source, you will need to remove and insert the appropriate plugs.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom or index
window functions are being used, these functions will be cancelled.
18
To S-Video output
L
|
AUDIO AUDIO
AUDIO
|
PC IN
R R
VIDEO S2 VIDEO
VIDEO IN
COMPONEN
To video output

Example of connecting to computer

L
|
|
NOTE:
B It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
B Refer to the list of compatible signals on page 49 for the types of RGB
signals which can be input to the projector by connecting a computer.
Computer
To RGB output
To audio output
L
|
AUDIO AUDIO
|
PC IN
R
VIDEO S2 VIDEO
VIDEO IN
COMPONENT IN
L Y
|
AUDIO
|
R P /C
B B
P /C
R R
19