Maserati Levante 2021 Owner's Manual page 301

storage box (see chapter "Tool Kit" in
this section).
• Take the tools (indicated in picture)
for changing the wheel from the
container.
• Unscrew and pull out the spare wheel
locking knob.
• Take the tool box container, the
compressor and the compact spare
wheel out of the boot.
Procedure Valid for 2.0 L4 MHEV
Model
• Release the straps that anchor the
compact spare wheel bag to the boot
compartment floor.
• Remove the bag from the boot
compartment.
• Lift the ground coverage of the boot
compartment.
• Remove the compressor from the
preformed container.
In an Emergency
• Remove the compact spare wheel
and other tools from inside the bag.
Compact Spare Wheel Installation
• Fit the adapter on the spanner.
Extend the spanner as shown,
then loosen anticlockwise by
approximately one turn the five
bolts on the wheel to be changed.
In case a wheel security stud bolt is
installed, it can only be removed by
using the specific fitting spanner
insert provided with the "Wheel
Security Stud Bolt Kit", available in
the "Genuine Accessories" range. In
this case, the insert must be installed
on the kit spanner.
• Place the jack near the wheel to be
changed as illustrated. Make sure
that the head of the jack is correctly
inserted in one of the slots 1 or 2
under the longitudinal member.
7
299