Maserati Levante 2021 Owner's Manual page 24

Understanding the Vehicle
Front Seats Heat Function
NOTE:
The engine must be running for the
heated seats to operate.
2
If the function is not active (state
"OFF"), the dynamic parts of the icon
are grey: to activate the function
operate in the following mode:
• Starting from the state "OFF",
within 15 seconds touch the driver or
passenger seat soft-key once to select
HI-level heating displayed by the seat
icon with 2 arrows and 2 red lines.
• Within 15 seconds, touch the driver
or passenger seat soft-key a second
time to select LO-level heating
displayed by the seat icon with 1
arrow and 1 red line.
• Within 15 seconds, touch the same
soft-key a third time to shut off the
seat heating.
NOTE:
Once a heat setting is selected, heat
will be felt within 2 to 5 minutes.
When the HI-level setting is selected,
the heater will provide a boosted heat
level during the first 4 minutes of
operation.
Then, the heat output will drop to the
normal HI-level.
22
If the HI-level setting is selected, the
system will automatically switch to LO-
level after a maximum of 60 minutes
of continuous operation.
At that time, the display will indicate
the change from HI to LO.
The LO-level setting will turn in "OFF"
state automatically after a maximum
of approximately 45 minutes.
Front Ventilated Seats ( )
To enhance occupants comfort by high
external temperatures, both the driver
and passenger seats, on request, can
be ventilated.
Small fans are located in the seat
cushion and seatback, they draw air
from the seat surface through fine
perforations in the seat cover to help
keep the driver and front passenger
cooler when the temperature is high.
The ventilated seats are operated with
the MIA system.
The seat comfort icons are in the
upper status bar in any MIA screen
configuration or are accessible in
the "Seats and Wheel" submenu of
the "Comfort" page as indicated for
heated seats.
Touch the heated/vented seat icon
near the temperature value to open
the pop up that will allow you to
activate and set the function on the
driver's seat and/or on the passenger
seat.
Front Ventilated Seats Function
NOTE:
The engine must be running for the
ventilated seats to operate.
If the function is not active (state
"OFF"), the dynamic parts of the icon
are grey: to activate the function
operate in the following mode:
• Starting from the state "OFF" ,
within 15 seconds touch the driver or
passenger seat soft-key once to select
HI-level ventilation displayed by the
seat icon with the fan and two blue
lines.
• Within 15 seconds, touch the driver
or passenger seat soft-key a second
time to select LO-level ventilation
displayed by the seat icon with the
fan and 1 blue line.