The following table shows the on/off condition of external lights, according to the ignition device position, to the engine
status, to the twilight sensor mode and to the light switch position.
Ignition
Engine
Device
Status
Position
–
OFF
ACC
Off
RUN
Off
RUN
On
RUN
On
(1) The lighting system uses the same LED for DRL and front position lights with two different levels of intensity: high
for DRL and low for position lights.
(2) The lights are powered up for 30 minutes to preserve the charge of the battery.
(3) In some countries a message on TFT display alerts the user to use
lights will turn on with engine started also in low ambient light conditions or at night.
(4) To preserve the charge of the battery, do not leave these lights on for a long time.
Twilight
Sensor
Mode
Position lights (1), side
–
marker and license plate
lights on (4).
Position lights (1), side
–
marker and license plate
lights on (2).
Position lights (1), side
–
marker and license plate
lights on (2).
DAY
DRL (1) on.
Low beams, position (1),
NIGHT
side marker and license
plate lights on (3).
Dashboard Instruments and Controls
Light Switch Position
AUTO
All lights off.
All lights off.
All lights off.
DRL (1) on.
Low beams, position (1),
side marker and license
plate lights on.
position when parking because the position
Low beams, position (1),
side marker and license
plate lights on.
Low beams, position (1),
side marker and license
plate lights on (2).
Low beams, position (1),
side marker and license
plate lights on (2).
Low beams, position (1),
side marker and license
plate lights on.
Low beams, position (1),
side marker and license
plate lights on.
4
145