Maserati Levante 2021 Owner's Manual page 252

Driver Assistance Systems
(Continued)
• In order to ensure proper operation,
the CC system has been designed
to shut down if multiple systems
are operated at the same time
(example: ACC and FCW). When
conditions so allow, the CC system
can be reactivated by pushing the
CC "ON/OFF" button or the ACC
time gap button (in the Optional
Configuration) and resetting the
desired vehicle set speed.
Displayed Information
Apart from the pop up messages
at the centre of the TFT display, CC
system status is represented by icons
at the top left of the TFT display,
in the dedicated area. See "TFT
Display Areas" in section "Dashboard
6 Instrument and Controls".
Displayed information depends on
system status: ready, set, temporarily
cancelled or override.
Activation
To turn the system on, push the
ON/OFF button or the ACC time gap
button for 2 seconds (in the Optional
Configuration). The
with below 3 dashes on the TFT display
will illuminate.
250
To turn the system off, push the
ON/OFF button a second time
or the ACC button (in the Optional
Configuration). The
will turn off.
NOTE:
The CC system must be turned off
when not in use.
WARNING!
Never leave the Cruise Control system
on when not in use. You could
accidentally set the system or cause it
to go faster than you want. Always
leave the system off when you are not
using it.
Speed Range of Use
white light
Speed
Minimum
Speed
Engaged/activated
Maximum
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
(in the example: 100 km/h), push
downward the multifunction switch
(SET -) and release.
The green light with below the
desired speed will illuminate on the
TFT display.
white light
Release the accelerator and the vehicle
will operate at the selected speed.
NOTE:
The vehicle should be traveling at a
steady speed and on level ground
km/h (mph)
before pushing the switch downward.
30 (20)
km/h (mph)
30 (20)
210 (130)