Makita DVP181 Instruction Manual page 6

Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The c o rrec t
power tool will do the job better and safer at the rate
for whic h it was des i gned.
2. Do not use the power tool if the switch does not
turn it on and off. Any power tool that c a nnot be
c o ntrolled with the s w itc h is dangerous and mus t be
repaired.
3. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Suc h prev e ntiv e s a fety meas u res reduc e the ris k of
s t arting the power tool ac c i dentally.
4. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users .
5. Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many ac c i dents are c a us e d by poorly
maintained power tools .
6. Keep cutting tools sharp and clean. Properly
maintained c u tting tools with s h arp c u tting edges
are les s lik e ly to bind and are eas i er to c o ntrol.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Us e of the power tool
for operations different from thos e intended c o uld
res u lt in a haz a rdous s i tuation.
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and gras p ing s u rfac e s do not allow for s a fe handling
and c o ntrol of the tool in unex p ec t ed s i tuations .
9. When using the tool, do not wear cloth
work gloves which may be entangled. The
entanglement of c l oth work glov e s in the mov i ng
parts may result in personal injury.
Battery tool use and care
Recharge only with the charger specified by the
1.
manufacturer. A c h arger that is suitable for one
type of battery pack may create a risk of fire when
us e d with another battery pac k .
Use power tools
2.
designated battery packs. Us e
battery packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, li uid may be ejected
4.
from the battery; avoid contact. If contact
accidentally occurs,
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns .
only with specifically
of any other
ush with water. If li uid
5. Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to fire
6.
or excessive temperature. Exposure to fire or
temperature abov e 130 °C may c a us e ex p los i on.
7. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outs i de
the specified range may damage the battery and
increase the risk of fire.
Service
Have your power tool serviced by a
1.
repair person using only identical replacement
parts. This will ens u re that the s a fety of the power
tool is maintained.
2. Never service damaged battery packs. Serv i c e
of battery pac k s
manufac t urer or authoriz e d s e rv i c e prov i ders .
3. Follow instruction for lubricating and changing
accessories.
Cordless vacuum pump safety
warnings
Read c a refully ins t ruc t ions in the literature, s t ric t
obs e rv a nc e of proc e dures is main c o ndition for operator
s a fety.
1. The vacuum pump is a machine used to
evacuate refrigeration and air conditioning
e uipment and recovery vessels. Do not use
it for other applications. Doing s o may res u lt in
ac c i dents .
2. Always inspect the vacuum pump for oil leaks
before use. Failure to do so may result in fire.
3. Check the oil level and condition (deterioration,
etc. to enable safe and efficient work.
4. Wear safety glasses and gloves when handling
refrigerant; avoid contact with refrigerant,
blindness and injuries may result to operator.
Ade uate performance may not be obtained in
5.
extremely hot or cold environments.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1. Before using
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
6 ENGLISH
s h ould only be performed by the
battery cartridge,
ualified
read all