Filter replacement
After a total of 720 hours of operation, the tower fan will beep five times and the display will
light up a sequence of indicators (as shown below). This indicates that the filter needs to be
replaced.
The steps to replace the filter are as follows:
1.
Turn the top cover anticlockwise
to unlock and remove the filter.
3. Attach the new filter o to the top cover
with the buckle. This creates the filter
assembly.
After replacing the filter, press and hold the ON/OFF button on the remote control for 5
seconds. The tower fan will then begin a new 720-hour cycle.
22
2. Disconnect the old filter from the top
cover.
4. Place the filter assembly back in into
the tower fan body and turn it
clockwise to secure.