Advertisement
Available languages
Available languages
4
Plug in the appliance.
5
Place the potato bar in a bowl with ingredients and set the speed ring to 10.
6
Press the on/off button.
7
Move the potato bar up and down for approximately 20 seconds. Continue until the desired
result is achieved.
Detaching the potato bar
1
To detach the potato bar, press the release button. (Fig. 12)
2
To remove the paddle from the potato bar turn it clockwise (Fig. 13).
3
To detach the coupling unit from the potato bar turn it counterclockwise (Fig. 14).
Note: Always clean the potato bar immediately after use (see chapter 'Cleaning' and the cleaning table).
Milk foamer
1
Connect the milk foamer to the coupling unit. (Fig. 15)
2
Connect the coupling unit to the motor unit (Fig. 16).
3
Plug in the appliance.
4
Heat up the milk to a temperature between 55°C - 65°C/131°F - 149°F.
Caution: Do not process more than 1 batch without interruption. Let the appliance cool down
for 5 minutes before you continue processing.
5
Pour the milk into a tall heat-resistant beaker.
6
Set the speed ring to the highest setting, press the turbo button and froth the milk for
approximately 60 seconds.
Note: Clean the milk foamer immediately after use (see chapter ' Cleaning' and the cleaning table).
Detaching the milk foamer
1
To detach the coupling unit, press the release button (Fig. 17).
2
To detach the milk foamer, pull it off the coupling unit (Fig. 18).
3
To detach the milk foamer cones, pull them off the milk foamer (Fig. 19).
ENGLISH
11
Advertisement
