Initial Use; Important Notice - Baseus Encok W05 User Manual

Product operating method

Initial use

Please tear off the insulating sticker on the earphone, then put it in the charging case.
Step 1 – Turn on
The earphones automatically enter the power-on state after you take them out from the
charging case.
Step 2 – Pairing mode
When using for the first time, the earphones automatically enter pairing mode after
being turned on. (White light flashes)
Step 3 – Wireless connection
Turn on the Wireless function of your mobile phone, select the device model: Baseus
Encok W05. White light will be on for 1 second when connected successfully.
Step 4 – Shutdown
Put the earphone into the charging case and the earphone will power off automatically.

Important notice

In-ear Detection
Checks the status of wearing earphones. When users take off either earphone, music
will stop playing. When users wear both earphones again, music will resume playing.
Pairing time
In pairing mode, the earphones will automatically turn off if disconnection lasts for more
than 5 minutes.
Restore factory settings
Open the lid of the charging case (within 10 seconds), and long press the left and right
earphone for 7 seconds. When the white light flashes, it means the restoration of factory
default settings is completed.
5