Operation; Manual Operation - Stanley Argon Built 3 Sided Manual

OPERATION

The Fireplace operates by using either the touch panel located on the upper left hand corner
or by remote control.
Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket.

MANUAL OPERATION

Press to turn on and off the fireplace.
1.
Press to adjust the flame brightness. There are 6 brightness levels（L6-L1） and
2.
an off(OF) position. Each time the flame button is pressed, the brightness of the flame
decrease.
press the flame button for 10 seconds, the timing indicator light on and will rapidly
blinks, at this time, You can use the TuyaSmart APP to connect to the fireplace.
to adjust the ember Bed /Moodlight brightness. There are 11 brightness.
3. Press
levels (d11-d2), dynamic condition(d1) ,and the OFF(OF) setting you can cycle through.
to set the turn-off time, 30min-1h-2h-3h-4h-5h-6h-7h-8h-t0. The indicator light
4. Press
the current timing. If the timing in off position, the second press will show 30. Multiple times
to set operating duration to OF, 30 min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h.
5. Press or the first time to display the current setting temperature，press the button
again to clear the current temperature. If the heater in off position, the second press will
show 22℃(72℉).Multiple times to set ambient temperatures at 22℃( 72℉) , 23℃
(74℉) ,24℃( 76℉) , 25℃( 78℉) , 26℃( 80℉) , 27℃( 82℉) , 28℃( 84℉) ,15℃( 52℉) ,
16℃( 54℉) , 17℃( 56℉) ,18℃( 58℉) , 19℃( 60℉) , 20℃( 62℉) , 21℃( 64℉) .
Temperature unit convert functionZ When the heater is on, press and hold the"
Button for 5 seconds, current temperature unit display will convert to another temperature
unit.
14
"