Stanley Argon Built 3 Sided Manual page 12

6. Insert the fireplace into the wall opening.
Drive the mounting screws into the frame plates
on the unit and the wall studs. To fix the bottom
of the fireplace and the wall studs with the
framing plates that you've removed from left
and right side of the fireplace at STEP 4. Plug in
and check if the fireplace works.
7. After checking that the fireplace operates
properly, cover the glass panels with protective
plastic bag and install plywood or drywall.
8. Decorate the plywood or drywall with glazed
tile, wallpaper, etc.
12