Pair Up With The Rear Speakers; Pair Up With The Subwoofer - Philips 5000 Series User Manual

from the main unit. Make sure that
the left, right, and the main unit are
at equal distance from your seating
position.
4
REAR SPEAKER L (rear left) and
REAR SPEAKER R (rear right)
speakers:
Place the rear surround speakers
to the left and right side of your
seating position, either in line with it
or slightly behind it.
5
SUBWOOFER (subwoofer):
Place the subwoofer at least one
meter to the left or right of the
TV. Leave about 10-centimeter
clearance from the wall.
6
Wireless box (receiver):
Place the wireless box in between
the rear speakers for easy cable
connection.
Pair up with the rear
speakers
Set up the rear speakers to work with
the main unit wirelessly. The rear
speakers automatically pair up with
the main unit for wireless connection
when you turn on the main unit, and the
wireless box.
What you need
•
Connect the rear speakers to the
supplied wireless box (make sure
that the left and right speakers
match the connectors on the
wireless box).
•
Connect the wireless box to AC
power to power on.
If no audio from the rear speakers can
be heard, do the following for pairing.
1
Press the PAIRING (PAIRING)
button on the wireless box to enter
the pairing mode.
EN
8
» The white LED on the wireless
box blinks quickly.
2
In OPTICAL mode (press OPTICAL)
, within six seconds, on the remote
control, press
Volume + once, and then hold
down BASS +.
» If the pairing succeeds, the white
LED on the wireless box lights
up.
» If the pairing fails, the white LED
on the wireless box blinks slowly.
3
If the pairing fails, repeat the steps
above.
Pair up with the
subwoofer
The wireless subwoofer automatically
pair up with the main unit for wireless
connection when you turn on the main
unit, and the subwoofer.
If no audio from the wireless subwoofer
can be heard, do the following for
pairing.
1
Turn on the main unit, and the
subwoofer.
» If the connection to the main
unit is lost, the white LED on the
subwoofer blinks slowly.
2
Press the PAIRING (PAIRING)
button on the subwoofer to enter
the pairing mode.
» The white LED on the subwoofer
blinks quickly.
3
In OPTICAL mode (press OPTICAL)
, within six seconds, on the remote
control, press
Volume + once, and then hold
down BASS +.
» If the pairing succeeds, the white
LED on the subwoofer lights up.
twice then
twice then