Connectors; Connect And Set Up; Charge Portable Speakers; Pair Up With Subwoofer/Speakers - Philips Fidelio B5 User Manual

Connectors

This section includes an overview of the connectors
available on your SoundBar.
a b c d e
a AUDIO-IN
Audio input from, for example, an MP3 player
(3.5mm jack).
b AUX-AUDIO IN L/R
Connect to an analog audio output on the TV
or an analog device.
c DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the TV or
a digital device.
(SERVICE)
d
Connect a USB flash drive to upgrade software
of this product (not for media play).
e DIGITAL IN-OPTICAL
Connect to an optical audio output on the TV
or a digital device.
f HDMI IN1 / HDMI IN2
Connect to the HDMI output on a digital device.
g TO TV-HDMI OUT (ARC)
Connect to the HDMI (ARC) input on the TV.
h AC MAINS~
Connect to the power supply.
3

Connect and set up

This section helps you connect your SoundBar to a
TV and other devices, and then set it up.
For information about the basic connections of your
SoundBar and accessories, see the quick start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
6 EN
f g h

Charge portable speakers

If the portable left/right speaker is undocked from the
main unit, its battery level is indicated by the LED on
the speaker.
•
Light up white: full battery or more than 30%
capacity remaining
•
Light up red: low battery level, less than 30%
remaining
•
Flash red: near empty, less than 10% remaining
1
Dock your portable speakers into the main unit
to charge.
2
Turn on the main unit.
» During charging, the LED on the portable
speaker lights up orange.
» When fully charged, the LED on the
portable speaker lights up white for
10 seconds.
Note
•
It may take around two hours to fully charge the
portable speakers.
•
Battery performance varies due to many factors
including volume, sound setting and media played.

Pair up with subwoofer/speakers

The wireless speakers and subwoofer automatically
pair up with the SoundBar for wireless connection
when you turn on the SoundBar, the portable
speakers and the subwoofer.
If no audio from the wireless speakers and subwoofer
can be heard, manually pair up the portable speakers
and the subwoofer.
Pair up with the subwoofer
1
Turn on the SoundBar and the subwoofer.
» If the connection to the SoundBar is lost,
the indicator on the subwoofer blinks white
slowly.