Table of Contents
Advertisement
AUX
•
Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio output
sockets to the AUX socket on the unit.
Connect to Power
•
Before connecting the AC power cord,
ensure you have completed all other
connections.
Risk of product damage! Ensure that the
•
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
•
Connect the mains cable to the AC~ Socket
of the unit and then into a mains socket
•
Connect the mains cable to the AC~
Socket of the subwoofer and then into a
mains socket.
Pair up with the subwoofer
Automatic Pairing
Plug the Soundbar and the subwoofer into the
mains sockets and then press on the unit or
remote control to switch the unit to ON mode.
The subwoofer and Soundbar will automatically
pair.
•
When the subwoofer is pairing with
the Soundbar, the Pair indicator on the
subwoofer will flash fast.
•
When the subwoofer is paired with
the Soundbar, the Pair indicator on the
subwoofer will light up steadily.
10
L
R
AUDIO OUT
•
Do not press Pair on the rear of the
subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Unplug both units from the mains sockets
again, then plug them in again after 3 minutes.
2
Press and hold the PAIR button on the
rear of the subwoofer for a few seconds.
» The Pair indicator on the subwoofer
will rapidly blink.
3
Then press
control to switch the unit ON.
» The Pair indicator on the subwoofer
will become solid when successful.
4
If the Pair indicator still keeps blinking,
repeat step 1-3.
Tips
•
The subwoofer should be within 6 m of the Soundbar
in an open area (the closer the better).
•
Remove any objects between the subwoofer and the
Soundbar.
•
If the wireless connection fails again, check if there is a
conflict or strong interference (e. g. interference from
an electronic device) around the location. Remove
these conflicts or strong interferences and repeat the
above procedures.
•
If the main unit is not connected with the subwoofer
and it is in ON mode, the unit's POWER indicator will
flash.
on the unit or remote
Advertisement
Table of Contents
