IBM 900 Service Manual page 85

LABEL A
HAZARDOUS AREA
TRAINED SERVICE
PERSONNEL ONLY
LABEL B
LINE VOLTAGE
PRESENT WITH
MACHINE POWER
OFF
LABEL C
TURN MAIN
LINE SWITCH
"OFF" BEFORE
REMOVING
LABEL E
THIS MACHINE IS
WIRED FOR V
See logic drawings for
alternate voltage insn
LABEL R
CAUTION
REMOVE PRIMARY POWER
BEFORE REMOVING COVER
LABEL D
CAUTION
DUE TO CONNECTED EQUIPMENT
HAZARDOUS VOLTAGES
MAY BE PRESENT AT ANY TIME
LABEL G
This aquipment has been tested with a class a
computing device and has been found to comply
with part 15 FFC rules. See instruction manual.
Operation in a residential area may cause
unacceptable interference to radio and tv
reception requiring the operator to take whatever
steps are necessary to correct the interference
LABEL H
WARNING
High grounding conductor current. Grounding
circuit continuity is vital for safe operation
of machine. Never operate machine with grounding
conductor disconnected
TILT LABEL
USE CARE WHEN MOVING
CAUTION
ON ROUGH SURFACES.
DO NOT TIP MORE THAN
10 DEGREES.
DO NOT REMOVE THIS LABEL
UK WRANING
WARNING
CONNECT ONLY APPARATUS COMPLYING
WITH BS 6301 TO THESE PORTS
LABEL X
TO DISCONNECT THIS
UNIT COMPLETELY,
CB1 ON MAINFRAME
MUST BE IN
THE "OFF" POSITION